View G6Z-K-1PER-DC12_3877278.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

high-frequency relay g6z 1 high-frequency relay g6z miniature 2.6-ghz-band, spdt, high-frequency relay ? superior high-frequency characteristics include an isolation of 30 db min., 60-65 db isolation at 900 mhz, insertion loss of 0.5 db max., and v.swr of 1.5 max. at 2.6 ghz. triplate micro stripline technology assures superior high-frequency characteristics. miniature dimensions of 20 8.6 8.9 mm (l w h). available models include single-coil latching (200 mw), dual coil latching (360 mw), and models with reverse contact arrangement. series includes versions with an e-shape terminal struc- ture, and models with a y-shape terminal structure, allowing greater freedom with pcb design. models with 75- ? impedance and models with 50- ? impedance are also available. surface mount relays available in tube packaging or tape- and-reel packaging. ordering information model number legend: 1. relay function none: non-latching u: single coil latching k: dual coil latching 2. contact form 1: spdt 3. terminal shape f: surface mount terminals p: pcb through-hole terminals 4. terminal structure none: y-shape terminal e: e-shape terminal 5. characteristic impedance none: 75 ? a: 50 ? 6. contact arrangement none: standard contact arrangement r: reverse contact arrangement 7. rated coil voltage 3, 4.5, 5, 9, 12, 24 g6z - ? - ??? - ?? - dc ? 1 2 3 4 5 6 7
2 high-frequency relay g6z standard models with pcb through-hole terminals standard models with surface-mounting terminals note: when ordering tape and reel packaging (surface-mount models), add ?-t r? to the model number, (example: g6z-1fe?tr?-dc12) ?-tr? does not appear on the relay itself. application examples these relays can be used for switching signals in media equipment. ? wire communications: cable tv (stb and broadcasting infrastructure), cable modems, and vrs (video response systems) wireless communications: transceivers, ham radios, car telephones, etc, its, high-level tv , satellite broadcasting, text multiplex broadcasting, pay tv, mobile phone sta- tions, tv broadcasting facilities, and community antenna systems public equipment: tvs, tv games, satellite radio units, car navigation systems industrial equipment: measuring equipment, test equipment, and multiplex transmission devices classification structure contact form terminal arrangement characteristic impedance rated coil voltage model non-latching fully sealed spdt e-shape 75 ? 3, 4.5, 5, 9, 12, and 24 vdc g6z-1pe 50 ? 3, 4.5, 5, 9, 12, and 24 vdc g6z-1pe-a y-shape 75 ? 3, 4.5, 5, 9, 12, and 24 vdc g6z-1p 50 ? 3, 4.5, 5, 9, 12, and 24 vdc g6z-1p-a single coil latching e-shape 75 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zu-1pe 50 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zu-1pe-a y-shape 75 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zu-1p 50 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zu-1p-a dual coil latching e-shape 75 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zk-1pe 50 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zk-1pe-a y-shape 75 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zk-1p 50 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zk-1p-a classification structure contact form terminal arrangement characteristic impedance rated coil voltage model non-latching fully sealed spdt e-shape 75 ? 3, 4.5, 5, 9, 12, and 24 vdc g6z-1fe 50 ? 3, 4.5, 5, 9, 12, and 24 vdc g6z-1fe-a y-shape 75 ? 3, 4.5, 5, 9, 12, and 24 vdc g6z-1f 50 ? 3, 4.5, 5, 9, 12, and 24 vdc g6z-1f-a single coil latching e-shape 75 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zu-1fe 50 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zu-1fe-a y-shape 75 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zu-1f 50 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zu-1f-a dual coil latching e-shape 75 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zk-1fe 50 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zk-1fe-a y-shape 75 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zk-1f 50 ? 3, 4.5, 5, 9, 12, and 24 vdc g6zk-1f-a
high-frequency relay g6z 3 specifications contact ratings note: this value is for an impedance of 50 ? or 75 ? with a v.swr of 1.2 max. high-frequency characteristics note: 1. the above values are initial values. 2. these values are for an impedance of 50 ? or 75 ? with a v.swr of 1.2 max. coil ratings the operating characteristics are measured at a coil temperature of 23 c. non-latching, standard and reverse-contact models single coil latching models g6zu-1p(e), g6zu-1f(e) load type resistive load rated load 10 ma at 30 vac; 10 ma at 30 vdc; 10 w at 900 mhz (see note) rated carry current 0.5 a max. switching voltage 30 vac, 30 vdc max. switching current 0.5 a frequency 900 mhz 2.6 ghz terminal type through hole surface mount through hole surface mount terminal structure e-shape y-shape e-shape y-shape e-shape y-shape e-shape y-shape isolation 75 ? 65 db min. 60 db min. 35 db min. 45 db min. 30 db min. 40 db min. 50 ? 60 db min. insertion loss (not including substrate loss) 75 ? 0.2 db max. 0.5 db max. 50 ? 0.1 db max. 0.3 db max. v.swr 75 ? 1.2 max. 1.5 max. 50 ? 1.1 max. 1.3 max. return loss 75 ? 20.8 db max. 14.0 db max. 50 ? 26.4 db max. 17.7 db max. maximum carry power 10 w (see note 2) maximum switching power 10 w (see note 2) rated voltage (vdc) rated current (ma) coil resistance ( ?, 10%) must operate voltage (vdc) must dropout voltage (vdc) maximum voltage (vdc) at 70 c max . power consumption (mw) 3 66.7 45 2.25 0.3 4.5 approx. 200 4.5 44.4 101.3 3.375 0.45 6.75 5 40.0 125 3.75 0.5 7.5 9 22.2 405 6.75 0.9 13.5 12 16.7 720.4 9 1.2 18 24 8.3 2880.1 18 2.4 36 rated voltage (vdc) rated current (ma) coil resistance ( ?, 10%) must set voltage (vdc) must reset voltage (vdc) maximum voltage (vdc) at 70 c max . power consumption (mw) 3 66.7 45 2.25 2.25 150% of rated voltage approx. 200 4.5 44.4 101.3 3.375 3.375 5 40.0 125 3.75 03.75 9 22.2 405 6.75 6.75 12 16.7 720.4 9 9 24 8.3 2880.1 18 18
4 high-frequency relay g6z dual coil latching models g6zk-1p(e), g6zk-1f(e) note: 1. the rated current and coil resistance are measured at a coil temperature of 23 c with a tolerance of 10%. 2. the operating characteristics are measured at a coil temperature of 23 c. 3. the maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously. rated voltage (vdc) rated current (ma) coil resistance ( ?, 10%) must set voltage (vdc) must reset voltage (vdc) maximum voltage (vdc) at 70 c max . power consumption (mw) 3 120 25 2.25 2.25 150% of rated voltage approx. 360 4.5 80 56.2 3.375 3.375 5 72 69.4 3.75 03.75 9 40 224.9 6.75 6.75 12 30 400 9 9 24 15 1599.9 18 18
high-frequency relay g6z 5 characteristics note: 1. the above values are initial values. 2. the contact resistance was measured with 10 ma at 1 vdc with a voltage drop method. 3. values in parentheses are actual values. 4. the insulation resistance was measured with a 500-vdc megohmmete r applied to the same parts as those used for checking the dielectric strength. engineering data item non-latching models single coil latching models dual coil latching models g6z-1p(e), g6z-1f(e) g6zu-1p(e), g6zu-1f(e) g6zk-1p(e), g6zk-1f(e) contact resistance (see note 2) 100 m ? max. operating (set) time (see note 3) 10 ms max. (approx. 3.5 ms) 10 ms max. (approx. 2.5 ms) release (reset) time (see note 3) 10 ms max. (approx 2.5 ms) set/reset time --- 12 ms insulation resistance (see note 4) 100 m ? min. (at 500 vdc) dielectric strength coil and contacts 1,000 vac, 50/60 hz for 1 min. coil and ground, contacts and ground 500 vac, 50/60 hz for 1 min. contacts of same polar- ity 500 vac, 50/60 hz for 1 min. vibration resistance mechanical durability 10 to 55 to 10 hz, 0.75-mm single amplitude (1.5-mm double amplitude) malfunction durability 10 to 55 to 10 hz, 0.75-mm single amplitude (1.5-mm double amplitude) shock resistance mechanical durability 1,000 m/s 2 malfunction durability 500 m/s 2 service life mechanical 1,000,000 operations min. (at 36,000 operations/hour) electrical 300,000 operations min. (30 vac, 10 ma/30 vdc, 10 ma), 100,000 operations min. (900 mhz, 10 w) at a switching frequency of 1,800 operations/hour ambient temperature operating: -40 c to 70 c (-40 f to 158 f) (with no icing or condensation) ambient humidity operating: 5% to 85% rh weight approx. 2.8 g ambient temperature ( c) ? 40 ? 20 250 200 150 100 50 0 020406080100 maximum voltage (%) g6z g6zu g6zk ambient temperature ( c) max. estimated value ? 60 ? 40 100 90 80 70 60 50 40 30 20 10 0 0 ? 20 20 40 60 80 100 max. max. avg. min. min. avg. must operate voltage must release voltage z z' y y' x x' 200 400 600 800 1,000 1,000 1,000 1,000 1,000 800 600 400 200 1,000 shock direction unit: m/s 2 sample: g6z-1p-a 50 ? 5 vdc number of relays: 5 x x' not energized energized z z' y y' ambient temperature vs. maximum voltage ambient temperature vs. must operate or must release voltage on the basis of rated voltage (%) sample: g6z-1p 5 vdc number of relays: 5 shock malfunction conditions: shock is applied in x, y, and z directions three times each with and without energizing the relays to check for contact malfunctions.
6 high-frequency relay g6z operating frequency ( 10 3 operations) 100 80 60 40 20 0 must operate must release max. max. min. min. sample: g6z-1pe 75 ? 5 vdc number of relays: 5 test conditions: 10 ma resistive load at 30 vac switching frequency: 1,800 operations/h 0.0001 0.001 0.01 0.1 1 10 100 operating frequency ( 10 3 operations) 100 80 60 40 20 0 0.0001 0.001 0.01 0.1 1 10 100 must operate must release max. max. min. min. sample: g6z-1pe 75 ? 5 vdc number of relays: 5 test conditions: 10 ma resistive load at 30 vdc switching frequency: 1,800 operations/h electrical endurance (with must operate and must release voltage) on the basis of rated voltage (%) electrical endurance (with must operate and must release voltage) on the basis of rated voltage (%) operating frequency ( 10 3 operations) 1,000 700 500 300 70 50 30 10 100 0.001 0.01 0.1 1 10 100 1,000 max. max. min. min. contact resistance sample: g6z-1pe 75 ? 5 vdc number of relays: 5 test conditions: 10 ma resistive load at 30 vdc switching frequency: 1,800 operations/h operating frequency ( 10 3 operations) 1,000 700 500 300 70 50 30 10 100 0.001 0.01 0.1 1 10 100 1,000 max. max. min. min. sample: g6z-1pe 75 ? 5 vdc number of relays: 5 test conditions: 10 ma resistive load at 30 vac switching frequency: 1,800 operations/h contact resistance no contact nc contact contact resistance (m ? ) electrical endurance (contact resistance) electrical endurance (contact resistance) contact resistance (m ? ) no contact nc contact external magnetic field (a/m) ? 1,200 ? 800 ? 400 0 400 800 1,200 +30 +20 +10 0 ? 10 ? 20 ? 30 (average value) sample: g6z-1p 5 vdc number of relays: 5 must operate voltage must release voltage s n external magnetic field (a/m) ? 1,200 ? 800 ? 400 0 400 800 1,200 +30 +20 +10 0 ? 10 ? 20 ? 30 (average value) sample: g6z-1p 5 vdc number of relays: 5 must operate voltage must release voltage sn external magnetic field (a/m) ? 1,200 ? 800 ? 400 0 400 800 1,200 change rate on the basis of initial value (%) +30 +20 +10 0 ? 10 ? 20 ? 30 (average value) sample: g6z-1p 5 vdc number of relays: 5 must operate voltage must release voltage external magnetic interference change rate on the basis of initial value (%) change rate on the basis of initial value (%) s n
high-frequency relay g6z 7 note: the tests were conducted at an ambient temperature of 23 c. * substrate loss removed n.o n.c sample: g6z-1pe 75 ? 5 vdc with terminating resistance frequency (mhz) 0 500 1,000 1,500 2,000 2,500 3,000 n.o. n.c. (average value (initial value)) 0 0.2 0.4 0.6 0.8 1.0 0 10 20 30 40 50 60 70 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1 v frequency (mhz) 0 500 1,000 1,500 2,000 2,500 3,000 n.o. n.c. sample: g6z-1pe 75 ? 5 vdc with terminating resistance (average value (initial value)) return loss v.swr . s w r 0 20 40 60 80 100 frequency (mhz) 0 500 1,000 1,500 2,000 2,500 3,000 n.o. n.c. sample: g6z-1pe 75 ? 5 vdc with terminating resistance (average value (initial value)) high-frequency characteristics at 75 ? (isolation) high-frequency characteristics at 75 ? (insertion loss) isolation (db) insertion loss (db) high-frequency characteristics at 75 ? (return loss, v.swr) return loss (db) 0 0.2 0.4 0.6 0.8 1.0 frequency (mhz) 0 500 1,000 1,500 2,000 2,500 3,000 n.o. n.c. (average value (initial value)) sample: g6z-1pe-a 50 ? 5 vdc with terminating resistance * substrate loss removed 0 10 20 30 40 50 60 70 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1 v frequency (mhz) 0 500 1,000 1,500 2,000 2,500 3,000 n.o. n.c. (average value (initial value)) sample: g6z-1pe-a 50 ? 5 vdc with terminating resistance return loss v.swr . s w r 0 20 40 60 80 100 frequency (mhz) 0 500 1,000 1,500 2,000 2,500 3,000 n.o. n.c. (average value (initial value)) sample: g6z-1pe-a 50 ? 5 vdc with terminating resistance high-frequency characteristics at 50 ? (isolation) high-frequency characteristics at 50 ? (insertion loss) high-frequency characteristics at 50 ? (return loss, v.swr) isolation (db) insertion loss (db) return loss (db) time (ms) 0.5 1.0 1.5 2.0 must operate bounce time must release bounce time 30 25 20 15 10 5 0 sample: g6z-1p 75 ? 5 vdc number of relays: 32 must operate must release time 25 20 15 10 5 time (ms) number of contacts 0 1.0 2.0 3.0 4.0 5.0 sample: g6z-1p 75 ? 5 vdc number of relays: 32 must operate and must release time distribution (see note.) must operate and must release bounce time distribution (see note.) number of contacts
8 high-frequency relay g6z dimensions unit: mm pcb through-hole terminal types + ? 7 1 11 10 9 8 12 13 14 + ? 7 1 11 10 9 8 12 13 14 + ? s ? + r 7 1 11 10 9 8 12 13 14 g6z-1pe 20 8.9 3 3-0.4 6-0.6 2.54 7.62 15.24 8.6 0.2 0.18 7.62 orientation mark orientation mark g6zu-1pe orientation mark g6z-1pe-r 15.24 7.62 2.54 7.62 six, 1.0-dia. holes three, 1.6-dia. six, 1.8-dia. three, 0.8-dia. holes g6z-1pe g6z-1pe-r g6zu-1pe mounting dimensions (bottom view) tolerance: 0.1 mm terminal arrangement/internal connections (bottom view) note: each value has a tolerance of 0.3 mm. (coil terminal) + ? 7 1 11 10 9 8 12 13 14 + ? s ? + r 7 1 11 10 9 8 12 13 14 g6z-1pe-a g6zu-1pe-a orientation mark 20 8.9 3 9-0.6 2.54 7.62 15.24 8.6 0.2 0.18 7.62 15.24 7.62 2.54 7.62 nine, 1.0-dia. holes nine, 1.8-dia. orientation mark g6z-1pe-a g6zu-1pe-a mounting dimensions (bottom view) tolerance: 0.1 mm terminal arrangement/internal connections (bottom view) note: each value has a tolerance of 0.3 mm. (coil terminal)
high-frequency relay g6z 9 + ? 7 4 1 10 9 8 12 13 14 5 3 7 4 1 10 9 8 12 13 14 5 3 + ? s ? + r g6z-1p 20 8.9 3 3-0.4 8-0.6 2.54 7.62 15.24 8.6 0.2 0.18 7.62 15.24 7.62 2.54 7.62 eight, 1.0-dia. holes three, 1.6-dia. eight, 1.8-dia. three, 0.8-dia. holes orientation mark g6zu-1p orientation mark g6z-1p g6zu-1p mounting dimensions (bottom view) tolerance: 0.1 mm terminal arrangement/internal connections (bottom view) note: each value has a tolerance of 0.3 mm. (coil terminal) + ? 7 4 1 10 9 8 12 13 14 5 3 7 4 1 10 9 8 12 13 14 5 3 + ? s ? + r 15.24 7.62 2.54 7.62 eleven, 1.0-dia. holes eleven, 1.8-dia. orientation mark orientation mark 20 8.9 3 2.54 11-0.6 7.62 15.24 8.6 0.2 0.18 7.62 g6z-1p-a g6zu-1p-a g6z-1p-a g6zu-1p-a mounting dimensions (bottom view) tolerance: 0.1 mm terminal arrangement/internal connections (bottom view) note: each value has a tolerance of 0.3 mm. (coil terminal) 7 6 1 11 10 9 8 12 13 14 s ? + r ? + 20 8.9 3 3-0.4 7-0.6 2.54 7.62 15.24 8.6 0.2 0.18 7.62 15.24 7.62 2.54 7.62 seven, 1.0-dia. holes three, 1.6-dia. seven, 1.8-dia. three, 0.8-dia. holes orientation mark g6zk-1pe mounting dimensions (bottom view) tolerance: 0.1 mm terminal arrangement/internal connections (bottom view) note: each value has a tolerance of 0.3 mm. (coil terminal)
10 high-frequency relay g6z 7 6 1 11 10 9 8 12 13 14 s ? + r ? + 15.24 7.62 2.54 7.62 ten, 1.0-dia. holes ten, 1.8-dia. orientation mark 20 8.9 3 2.54 10-0.6 7.62 15.24 8.6 0.2 0.18 7.62 g6zk-1pe-a mounting dimensions (bottom view) tolerance: 0.1 mm terminal arrangement/internal connections (bottom view) note: each value has a tolerance of 0.3 mm. (coil terminal) 7 6 5 4 3 1 10 9 8 12 13 14 s ? + r ? + 15.24 7.62 2.54 7.62 nine, 1.0-dia. holes three, 1.6-dia. nine, 1.8-dia. three, 0.8-dia. holes orientation mark 20 8.9 3 2.54 9-0.6 7.62 15.24 8.6 0.2 0.18 7.62 3-0.4 g6zk-1p mounting dimensions (bottom view) tolerance: 0.1 mm terminal arrangement/internal connections (bottom view) note: each value has a tolerance of 0.3 mm. (coil terminal) 7 6 5 4 3 1 10 9 8 12 13 14 s ? + r ? + 15.24 7.62 2.54 7.62 twelve, 1.0-dia. holes. twelve, 1.8-dia. orientation mark 20 8.9 3 2.54 12-0.6 7.62 15.24 8.6 0.2 0.18 7.62 g6zk-1p-a mounting dimensions (bottom view) tolerance: 0.1 mm terminal arrangement/internal connections (bottom view) note: each value has a tolerance of 0.3 mm. (coil terminal)
high-frequency relay g6z 11 surface mount terminal types 11 14 12 13 10 8 1 7 9 ? + 11 14 12 13 10 8 1 7 9 + ? s ? + r g6z-1fe 20 9.3 3-0.4 6-0.6 2.54 7.62 15.24 8.6 0.2 0.18 9.6 8.3 2.3 0.8 0.8 15.24 7.62 0.8 2.54 six, 1.1 orientation mark g6zu-1fe orientation mark g6z-1fe g6zu-1fe mounting dimensions (top view) tolerance: 0.1 mm terminal arrangement/internal connections (top view) note 1: each value has a tolerance of 0.3 mm. 2: the coplanarity of the terminals is 0.1 mm max. (coil terminal) 11 14 12 13 10 8 1 7 9 ? + 11 14 12 13 10 8 1 7 9 + ? s ? + r g6z-1fe-a g6zu-1fe-a 20 9.3 9-0.6 2.54 7.62 15.24 8.6 0.18 9.6 8.3 2.3 15.24 7.62 nine, 1.1 orientation mark orientation mark 2.54 g6z-1fe-a g6zu-1fe-a mounting dimensions (top view) tolerance: 0.1 mm terminal arrangement/internal connections (top view) note 1: each value has a tolerance of 0.3 mm. 2: the coplanarity of the terminals is 0.1 mm max. 0.2 (coil terminal) 35 4 14 12 13 10 8 1 7 9 ? + 14 12 13 10 8 1 7 9 + ? s ? + r 5 7 34 g6z-1f 20 9.3 8-0.6 2.54 7.62 15.24 8.6 0.18 9.6 3-0.4 8.3 2.3 0.8 0.8 7.62 15.24 0.8 2.54 eight, 1.1 orientation mark g6zu-1f orientation mark g6z-1f g6zu-1f mounting dimensions (top view) tolerance: 0.1 mm terminal arrangement/internal connections (top view) note 1: each value has a tolerance of 0.3 mm. 2: the coplanarity of the terminals is 0.1 mm max. 0.2 (coil terminal)
12 high-frequency relay g6z 35 4 14 12 13 10 8 1 7 9 ? + 14 12 13 10 8 1 7 9 + ? s ? + r 5 7 34 g6z-1f-a 8.3 2.3 7.62 15.24 2.54 eleven, 1.1 orientation mark g6zu-1f-a orientation mark 20 9.3 11-0.6 2.54 7.62 15.24 8.6 0.18 9.6 g6z-1f-a g6zu-1f-a mounting dimensions (top view) tolerance: 0.1 mm terminal arrangement/internal connections (top view) note 1: each value has a tolerance of 0.3 mm. 2: the coplanarity of the terminals is 0.1 mm max. 0.2 (coil terminal) 11 14 12 13 10 8 1 7 6 9 s ? + r ? + 20 9.3 7-0.6 2.54 7.62 15.24 8.6 0.18 9.6 3-0.4 8.3 2.3 0.8 0.8 15.24 7.62 2.54 0.8 seven, 1.1 orientation mark g6zk-1fe mounting dimensions (top view) tolerance: 0.1 mm terminal arrangement/internal connections (top view) note 1: each value has a tolerance of 0.3 mm. 2: the coplanarity of the terminals is 0.1 mm max. 0.2 (coil terminal) 11 14 12 13 10 8 1 7 6 9 s ? + r ? + 8.3 2.3 15.24 7.62 2.54 ten, 1.1 orientation mark 20 9.3 ten, 0.6 2.54 7.62 15.24 8.6 0.18 9.6 g6zk-1fe-a mounting dimensions (top view) tolerance: 0.1 mm terminal arrangement/internal connections (top view) note 1: each value has a tolerance of 0.3 mm. 2: the coplanarity of the terminals is 0.1 mm max. 0.2 (coil terminal)
high-frequency relay g6z 13 14 12 13 10 8 1 7 6 9 s ? + r ? + 35 4 orientation mark 20 9.3 nine, 0.6 2.54 7.62 15.24 8.6 0.18 9.6 three, 0.4 8.3 2.3 0.8 0.8 15.24 0.8 2.54 nine, 1.1 7.62 g6zk-1f mounting dimensions (top view) tolerance: 0.1 mm terminal arrangement/internal connections (top view) note 1: each value has a tolerance of 0.3 mm. 2: the coplanarity of the terminals is 0.1 mm max. 0.2 (coil terminal) 14 12 13 10 8 1 7 6 9 s ? + r ? + 35 4 8.3 2.3 15.24 7.62 2.54 twelve, 1.1 20 9.3 twelve, 0.6 2.54 7.62 15.24 8.6 0.18 9.6 orientation mark g6zk-1f-a mounting dimensions (top view) tolerance: 0.1 mm terminal arrangement/internal connections (top view) note 1: each value has a tolerance of 0.3 mm. 2: the coplanarity of the terminals is 0.1 mm max. 0.2 (coil terminal)
14 high-frequency relay g6z tube packaging and tape and reel packaging tube packaging relays in tube packaging are arranged so that the orientation mark of each relay in on the left side. be sure not to make mistakes in relay orientation when mounting the relay to the pcb. tube length: 530 mm (stopper not included) no. of relays per tube: 25 tape and reel packaging (surface mount terminal models) when ordering relays in tape packing, add the prefix ?-tr? to the model number, otherwise the relays in stick packing will be provided. relays per reel: 300 direction of relay insertion reel dimensions carrier tape dimensions note: the radius of the unmarked corner is 0.3 mm. stopper (gray) operation of relays stopper (green) top tape (cover tape) carrier tape emboss ta p e orientation mark pulling direction pulling direction r1 a 21 0.8 dia. 2 0.5 13 0.2 dia. enlarged view of a 33.5 1 37.5 1 330 80 32 0.3 22.6 0.1 20.6 0.1 5 max. 0.2 1.5 + 0.1 0 1.7 + 0.15 0 r0.75 28.4 0.1 a enlar g ed view of a 1.75 0.1 10 0.1 0.5 0.05 14.2 0.1 16 0.1 4 0.1 4 0.1 10.2 0.1 5 max. 1.5 + 0.1 dia. 0 2 0.1
high-frequency relay g6z 15 recommended so ldering method temperature conditions for irs method when using reflow soldering, ensure that the relay terminals and the top of the case stay below the following curve. check that these con- ditions are actually satisfied before soldering the terminals. do not quench the terminals after mounting. clean the relay using alcohol or water no hotter than 40 c max. the thickness of cream solder to be applied should be between 150 and 200 m on omron?s recommended pcb pattern. check the soldering in the actual mounting conditions before use. measured part preheating (t1 t2, t1) soldering (t3, t2) maximum peak (t4) terminals 150 180 c, 120 s max. 230 c min, 30 s max. 250 c max. top of case --- --- 255 c max. temperature t4 t3 t2 t1 preheating soldering time t 1 t 2 relay solder terminal pcb land correct soldering incorrect soldering insufficient amount of solder excessive amount of solder
16 high-frequency relay g6z safety precautions precautions for correct use please observe the following precautions to prevent failure to oper- ate, malfunction, or undesirable effect on product performance. high-frequency characteristics measurement method and measurement substrate high-frequency characteristics for th e g6z are measured in the way shown below. consult your omron representative for details on 50- ? models. measurement method for 75- ? models through-hole substrate (75- ? models, e-shape or y-shape) smd-type substrate (75- ? models, e-shape or y-shape) substrate for high-frequency characteristic compensation (75- ? models, e-shape or y-shape) substrate types material: fr-4 glass epoxy (glass cloth impregnated with epoxy resin and copper laminated to its outer surface) thickness: 1.6 mm thickness of copper plating:18 m note: 1. the compensation substrate is used when measuring the relay?s insertion loss. the insertion loss is obtained by subtracting the measured value for the compensation sub- strate from the measured value with the relay mounted to the high-frequency measurement substrate. 2. for convenience, the diagrams of the high-frequency measurement substrates gi ven here apply both to models with an e-shape terminal structure and to models with a y- shape terminal structure. 3. be sure to mount a standoff tightly to the through-hole sub- strate. 4. use measuring devices, connec tors, and substrates that are appropriate for 50 ? and 75 ? respectively. 5. ensure that there is no pattern under the relay. other- wise, the impedance may be adversely affected and the relay may not be able to attain its full characteristics. handling do not use the relay if it has been dropped. dropping the relay may adversely affect its functionality. protect the relay from direct sunlight and keep the relay under nor- mal temperature, humidity, and pressure. flow soldering solder: jis z3282, h63a soldering temperature: approx. 250 c (260 c if the dws method is used) soldering time: approx. 5 s max. (approx. 2 s for the first time and approx. 3 s for the second time if the dws method is used) be sure to make a molten solder level adjustment so that the solder will not overflow on the pcb. g6z 75- ? terminating resistance network vector analyzer (agilent technologies) 50 ?/ 75 ? adapter (agilent technologies) 11852b-004 hp8753d 1.4 0.4 30 40 40 30 6.3 0.95 3.59 1 4-dia. through-hole 0.6-dia. through-hole (unit: mm) 0.4 1.4 30 40 30 40 3.91 1 0.95 0.6-dia. through-hole 4-dia. through-hole (unit: mm) 6.3 20 30.7 1 0.95 40 30 4-dia. through-hole 0.6-dia. through-hole (unit: mm)
high-frequency relay g6z 17 claw securing force during automatic mounting during automatic insertion of relays, be sure to set the securing force of each claw to the following so that the relay?s characteristics will be main- tained. latching relay mounting make sure that the vibration or shock that is generated from other devices, such as relays, on the same panel or substrate and imposed on the latching relay does not exceed the rated value, otherwise the set/reset status of the latching relay may be changed. the latching relay is reset before shipping. if excessive vibration or shock is imposed, however, the latching relay may be set accidentally. be sure to apply a reset signal before use. coating do not use silicone coating to coat the relay when it is mounted to the pcb. do not wash the pcb after the relay is mounted using detergent containing silicone. otherwise, the detergent may remain on the surface of the relay. a b direction a: 4.90 n max. direction b: 4.90 n max. direction c: 4.90 n max. secure the claws to the shaded area. do not attach them to the center area or to only part of the relay.
18 high-frequency relay g6z omron electronic components, llc terms and conditions of sales 1. definitions : the words used herein are defined as follows. (a) terms: these terms and conditions (b) seller: omron electronic components llc and its subsidiaries (c) buyer: the buyer of products, including any end user in section iii through vi (d) products: products and/or services of seller (e) including: including without limitation 2. offer; acceptance: these terms are deemed part of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of products by seller. seller hereby objects to any terms proposed in buyer's purchase order or other documents which are inconsistent with, or in addition to, these te rms . 3. distributor : any distributor shall inform its customer of the contents after and including section iii of these terms. 1. prices; payment : all prices stated are current, subject to change without notice by seller. buyer agrees to pay the price in effect at time of shipment. payments for products received are due net 30 days unless otherwise stated in the invoice. buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. 2. discounts : cash discounts, if any, will apply only on the net amount of invoices sent to buyer after deducting transportation charges, taxes and duties, and will be allowed only if (a) the invoice is paid according to seller's payment terms and (b) buyer has no past due amounts owing to seller. 3. interest : seller, at its option, may charge buyer 1.5% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 4. orders : seller will accept no order less than 200 u.s. dollars net billing. 5. currencies : if the prices quoted herein are in a currency other than u.s. dollars, buyer shall make remittance to seller at the then current exchange rate most favorable to seller; provided that if remittance is not made when due, buyer will convert the amount to u.s. dollars at the then current exchange rate most favorable to seller available during the period between the due date and the date remittance is actually made. 6. governmental approvals : buyer shall be responsible for all costs involved in obtaining any government approvals regarding the importation or sale of the products. 7. taxes : all taxes, duties and other governmental charges (other than general real property and income taxes) , including any interest or penalties thereon, imposed directly or indirectly on seller or required to be collected directly or indirectly by seller for the manufacture, production, sale, delivery, importation, consumption or use of the products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by buyer to seller. 8. financial : if the financial position of buyer at any time becomes unsatisfactory to seller, seller reserves the right to stop shipments or require satisfactory security or payment in advance. if buyer fails to make payment or otherwise comply with these terms or any related agreement, seller may (without liability and in addition to other remedies) cancel any unshipped portion of products sold hereunder and stop any products in transit until buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by buyer. buyer shall in any event remain liable for all unpaid accounts. 9. cancellation; etc: orders are not subject to rescheduling or cancellation unless buyer indemnifies seller fully against all costs or expenses arising in connection therewith. 10. force majeure : seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. shipping; delivery: unless otherwise expressly agreed in writing by seller: (a) all sales and shipments of products shall be fob shipping point (unless otherwise stated in writing by seller) , at which point title to and all risk of loss of the products shall pass from seller to buyer, provided that seller shall retain a security interest in the products until the full purchase price is paid by buyer; (b) delivery and shipping dates are estimates only; and (c) seller will package products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. claims: any claim by buyer against seller for shortage or damage to the products occurring before delivery to the carrier must be presented in detail in writing to seller within 30 days of receipt of shipment. 1. suitability: it is the buyer?s sole respoinsibility to ensure that any omron product is fit and sufficient for use in a motorized vehicle application. buyer shall be solely responsible for determining appropriateness of the particular product with respect to the buyer?s application including (a) electrical or electronic components, (b) circuits, (c) system assemblies, (d) end product, (e) system, (f) materials or substances or (g) operating environment. buyer acknowledges that it alone has determined that the products will meet their requirements of the intended use in all cases. buyer must know and observe all prohibitions of use applicable to the product/s. 2. use with attention: the followings are some examples of applications for which particular attention must be given. this is not intended to be an exhaustive list of all possible use of any product, nor to imply that any use listed may be suitable for any product: (a) outdoor use, use involving potential chemical contamination or electrical interference. (b) use in consumer products or any use in significant quantities. (c) energy control systems, combustion systems, railroad systems, aviatio medical equipment, amusement machines, vehicles, safety equipment, installations subject to separate industry or government regulations. (d) systems, machines, and equipment that could present a risk to life or p 3. prohibited use: never use the product for an application inv o serious risk to life or property without ensuring that t h as a whole has been designed to address the risks, and t h product is properly rated and installed for the intende d within the overall equipment or system. 4. motorized vehicle application: use of any product/s for a motor i vehicle application must be expressly stated in the specif i seller. 5. programmable products: seller shall not be responsible for the buyer's pro g a programmable product. 1. warranty : seller's exclusive warranty is that the products will be free from d materials and workmanship for a period of twelve months from the date of s a (or such other period expressed in writing by seller). seller makes no w or representation, express or implied, about all other w a non-infringement, merchantability or fitness for a parti c purpose of the products. 2. buyer remedy : seller's sole obligation hereunder shall be to replace (in th e originally shipped with buyer responsible for labor charges for removal or r e thereof) the non-complying product or, at seller's election, to repay or credi t amount equal to the purchase price of the product; provided that there shal l liability for seller or its affiliates unless seller's analysis confirms that the pr o handled, stored, installed and maintained and not subject to contamination, misuse or inappropriate modification. return of any products by buyer mu s approved in writing by seller before shipment. 3. limitation on liability : seller and its affiliates shall not be lia b special, indirect, incidental or consequential damages, l o profits or production or commercial loss in any way co n with the products, whether such claim is based in contr a warranty, negligence or strict liability. further, in no ev liability of seller or its affilitates exceed the individual p the product on which liability is asserted. 4. indemnities : buyer shall indemnify and hold harmless seller, its affiliates an employees from and against all liabilities, losses, claims, costs and expens e attorney's fees and expenses ) related to any claim, investigation, litigation or p r ( whether or not seller is a party ) which arises or is alleged to arise from buyer' s omissions under these terms or in any way with respect to the products. 1. intellectual property : the intellectual property embodied in the products is t h property of seller and its affiliates and buyer shall not attempt to duplicate i t without the written permission of seller. buyer (at its own expense) shall inde m hold harmless seller and defend or settle any action brought against seller t that it is based on a claim that any product made to buyer specifications inf intellectual property rights of another party. 2. property; confidentiality : notwithstanding any charges to buyer for enginee tooling, all engineering and tooling shall remain the exclusive property of s e information and materials supplied by seller to buyer relating to the produc t confidential and proprietary, and buyer shall limit distribution thereof to its tr employees and strictly prevent disclosure to any third party. 3. performance data : performance data is provided as a guide in determining and does not constitute a warranty. it may represent the result of seller's te s and the users must correlate it to actual application requirements. 4. change in specifications : product specifications and description may be ch a time based on improvements or other reasons. it is seller?s practice to cha n numbers when published ratings or features are changed, or when significa engineering changes are made. however, some specifications of the prod u changed without any notice. 5. errors and omissions : the information on seller?s website or in other docu m has been carefully checked and is believed to be accurate; however, no res assumed for clerical, typographical or proofreading errors or omissions. 6. export controls : buyer shall comply with all applicable laws, regulations an d regarding (a) export of the products or information provided by seller; (b) s a products to forbidden or other proscribed persons or organizations; (c)discl o non-citizens of regulated technology or information. 1. waiver : no failure or delay by seller in exercising any right and no course o between buyer and seller shall operate as a waiver of rights by seller. 2. assignment : buyer may not assign its rights hereunder without seller's writ t 3. law : these terms are governed by illinois law (without regard to conflict of law s and state courts in illinois have exclusive jurisdiction for any dispute hereun 4. amendment : these terms constitute the entire agreement between buyer a relating to the products, and no provision may be changed or waived unles s signed by the parties. 5. severability : if any provision hereof is rendered ineffective or invalid, such p r not invalidate any other provision. i. general ii. sales iii. precautions iv. warranty and limitation v. information; etc. vi. miscellaneous
high-frequency relay g6z 19 certain precautions on specifications and use 1. suitability for use . seller shall not be responsible for conformity with any stan- dards, codes or regulations which apply to the combination of the product in buyer's application or use of the product. at buyer's request, seller will pro- vide applicable third party certificati on documents identifying ratings and limi- tations of use which apply to the produc t. this information by itself is not sufficient for a complete determination of the suitability of the product in com- bination with the end product, machine, system, or other application or use. buyer shall be solely responsible for determining appropriateness of the par- ticular product with respect to buyer's application, product or system. buyer shall take application responsibility in all cases but the following is a non- exhaustive list of applications for which particular attention must be given: (i) outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or us es not described in this document. (ii) energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) use in consumer products or any use in significant quantities. (iv) systems, machines and equipment that could present a risk to life or property. please know and observe all prohibitions of use applicable to this product. never use the product for an application involving serious risk to life or property without ensuring that the system as a whole has been designed to address the risks, and that the omron product is properly rated and installed for the intended use within the overall equipment or system. 2. programmable products . seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof. 3. performance data . performance data given in this publication is provided as a guide for the user in determining suitability and does not constitute a war- ranty. it may represent the result of seller's test conditions, and the users must correlate it to actual application requirements. actual performance is subject to seller's warranty and limitations of liability. 4. change in specifications . product specifications and accessories may be changed at any time based on improvements and other reasons. it is our prac- tice to change part numbers when published ratings or features are changed, or when significant construction changes are made. however, some specifica- tions of the product may be changed without any notice. when in doubt, spe- cial part numbers may be assigned to fix or establish key specifications for your application. please consult with your seller representative at any time to confirm actual specifications of purchased product. 5. errors and omissions . the information in this publication has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 6. rohs compliance . where indicated, our products currently comply, to the best of our knowledge as of the date of this publication, with the requirements of the european union's directive on t he restriction of certain hazardous substances ("rohs"), although the requirements of rohs do not take effect until july 2006. these requirements ma y be subject to change. please consult our website for current information. omron on-line global - http://www.omron.com usa - http://www.components.omron.com cat. no. j01c-e-01 printed in usa omron electronic components llc 55 e. commerce drive, suite b schaumburg, il 60173 847-882-2288 01/07 specifications subject to change without notice complete ?terms and conditions of sale? for product purchase and use are on omron?s website at http://www.components.omron.com ? under the ?about us? tab, in the legal matters section. all dimensions shown are in millimeters. to convert millimeters into inches, multiply by 0. 03937. to convert grams into ounces, multiply by 0.03527.

▲Up To Search▲

Price & Availability of G6Z-K-1PER-DC12

	To Download G6Z-K-1PER-DC12 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .